Precision punching is a special metal stamping technique that can achieve parts characteristics that conventional metal cutting or punching processes can hardly achieve, such as flatness and full cutting edges.
In precision impact, the manufactured product requires a complete contact surface at the edge of the part. For example, a gear typically requires critical flatness and must be fully engaged with the gear it matches over the entire part thickness range, making it an ideal candidate for precision impact.
Precision punching can also punch out very small holes in terms of metal thickness, as well as holes near the edge of the part, and other holes.
Conventional punching
If you also understand what happens during conventional metal punching, it is easier to understand precision impact.
The first thing to remember is that all metals have a specific elastic behavior. During the routine punching process, the metal deforms at the initial punch contact. Figure 1 shows the first step of punching or cutting on a sheet of metal.

Figure 1
When the punch comes into contact with the metal plate, the metal begins to deform and protrude around the punch contact point.
When the punch comes into contact with the metal plate, the metal begins to deform and protrude around the punch contact point. When the downward force of the press exceeds the yield strength of the part material, the tip of the punch begins to penetrate the metal surface. Both the punch and the mold (or button) begin to cut from their respective sides.
When the maximum tensile strength is reached, the metal breaks or fractures from the punch edge to the mold edge. This causes the cutting edge to look partly cut and partly broken or fractured. This cutting edge condition is commonly referred to as a “cutting belt”.
In most cases, about 10% to 30% of the cutting edge is cut and the rest is broken. There are two main reasons for breakage:
The distance between the punch and the mold creates leverage, which tends to pull the metal away, causing it to break.
The deformation allowed during the cutting process can also lead to premature metal breakage.
Allowing the metal to deform severely during the cutting process can cause the metal to strain and thus generate stress. The trapped stress in the product can cause it to lose flatness, which is why it is difficult to maintain the key flatness properties using conventional methods.
Figure 2 shows the cutting belt created using the conventional metal punching process. The cutting surface is partially inclined and has a rough appearance in the broken area of the cut.

Figure 2
The cutting surface of the cutting belt created using conventional metal punching process is partially inclined and has a rough appearance in the broken area of the cut.
How does precision impact work?
Precision punching requires the use of three high-pressure pads in a special press. These pads keep the metal flat during the cutting process and prevent the metal from plastic deformation as the punch enters.
Most precision punching operations include a V-ring in one of the high-pressure pads. This ring is also commonly referred to as a “punch ring” or “impact ring”. Before the punch touches the workpiece, the ring is punched into the metal, surrounding the workpiece, preventing the metal from moving outwards while pushing it inwards towards the punch. This reduces the curling of the cutting edge.
Precision impact operations typically require a gap of less than 0.0005 inches on each side. This small gap, combined with high pressure, can produce a fully cut part edge.
Precision punching is much like a cold extrusion process. The scrap (or part) is pushed out or extruded from the material while being tightly clamped by the high-pressure fixing plates and mats. The tight clamping of the high-pressure plates prevents the metal from inflating or plastically deforming during the extrusion process.
Figure 3 shows the precision punching process and the traditional stamping process.
Figure 4 shows the parts manufactured by the two processes.

Figure 3
Precision punching and traditional metal cutting.

Figure 4
Precision punching can be used in a variety of metals, including tool steel. It is also suitable for heavy metals up to 0.625 inches thick and can even be used to make small holes.
Advantages and Limitations
Precision punching achieves part flatness that is almost impossible to achieve with conventional processes. It can create 100% cutting edges, 90 degree angles, and dimensional accuracy is often comparable to mechanical machining.
Precision punching can be used in a variety of metals, including tool steel. It is also suitable for heavy metals up to 0.625 inches thick and can even be used to make small holes.
This process is relatively fast; parts can be produced continuously, and cold plating and embossing can be added during the process.
Due to the need for small gaps, precision impact can lead to severe tool wear, so high-end tool steels with coatings or carbides are often required. Since V-rings require space, more material is often also required to manufacture parts.
The roughness of precision stamping parts is usually larger than the roughness of traditional stamping parts, so it is usually necessary to remove the roughness.
Finally, the initial investment in precision impact equipment can be considerable. Stamping plants unfamiliar with the process can consider outsourcing precision impact services as an introduction to the technology before deciding whether to make such a large investment.



