Delem DA58T & DA58Tx 2D CNC Press Brake Controllers: Clear Guide for Buyers and Operators

Delem’s DA58T and DA58Tx press brake controllers sit in the visual CNC category: they provide 2D graphics, automatic bend sequencing, and guided operation without the complexity of full 3D control systems. They are aimed at workshops that want faster setups, fewer trial bends, and more stable results on CNC press brakes.

Where DA-58T and DA-58Tx Make Sense

For many fabricators, moving from purely numerical controls (such as DA53T/DA53Tx) to a 2D graphical CNC is the first major step in improving bending efficiency. Instead of working from a list of numeric steps, operators see the part, tools, and bends as a graphical sequence on the controller screen.

These controllers are a strong fit when:

  • You run varied small and medium batches and want to reduce setup time without investing in high‑end 3D systems.
  • You want to capture “tribal knowledge” in programs, so bending quality does not depend on a single expert operator.
  • You are upgrading older NC/early CNC brakes that lack graphics, automatic sequence calculation, and collision checks.

Both DA58T and DA58Tx belong to Delem’s DA‑50Touch family, sharing a common operating approach with DA53T/DA53Tx and with higher‑end DA-60 series controls such as DA66S and DA69S. That continuity is useful when several Delem‑equipped machines operate in the same workshop or when long‑term control upgrades are planned.

What the DA-58T Offers in Daily Operation

DA58T is a 2D graphical CNC designed for synchronized press brakes and built around a color multi‑touch screen. The interface is organized so operators move directly between product, tooling, and production pages, minimizing time spent in nested menus.

da-58t
DA-58T

In everyday use, DA58T helps operators to:

  • Define parts in 2D, with bends and flanges shown graphically instead of only as numeric steps.​
  • Let the controller propose a bend sequence and check it for collisions, then refine it if necessary before bending the material.
  • Control the ram (Y‑axes) using algorithms suitable for modern synchronized press brake systems, so angles remain stable over the stroke.
  • Control motorized or CNC crowning systems to compensate for machine and workpiece deflection on long parts so angles remain consistent along the length.

The workflow is built around a “program‑to‑production” concept: once tools, material, and part geometry are defined, the controller calculates axis positions for each bend and guides the operator through the sequence. This helps reduce trial pieces and makes it easier to reproduce results when a job returns.​

Standard capability covers up to 4 controlled axes, usually configured as synchronized Y1/Y2, X (backgauge) and one additional backgauge axis such as R or Z when the machine hardware supports it.

How Delem DA-58Tx Differs from DA-58T

DA58Tx is the same class of controller as DA58T, with the same axis capability (up to 4 axes) and the same 2D graphical programming concept. The difference lies in how much visual space and clarity it provides the operator.

  • DA58T uses a 15‑inch class high‑resolution touch screen.
  • DA58Tx uses a larger widescreen display (around 18.5‑inch class) with higher resolution.

This larger, higher‑resolution display allows more information to be visible at once and easier to read over long shifts or on more complex jobs.

da-58tx
DA-58Tx

DA58T vs DA58Tx at a Glance

AspectDA58TDA58Tx
Display15‑inch class color TFT, 1024×768 high‑resolution multi‑touch.18.5‑inch class color TFT, 1366×768 high‑resolution multi‑touch.
Programming2D graphical product programming with automatic bend sequence and collision checks.Same 2D graphical programming, automatic sequencing and collision checks.
Axis capabilityUp to 4 axes (typically Y1, Y2, X and an additional backgauge axis such as R or Z, when supported).Same axis capability and typical configurations.
Operator focusClear, efficient 2D visualization in a compact screen size.Operators who benefit from more on‑screen information and finer detail.

Which Should You Choose

Both options provide the same core 2D graphical Delem control capabilities; the decision is mainly about how much visual workspace you want.

  • Choose DA58T if you prefer a compact visual CNC, operators stand close to the control, and space around the console is limited.
  • Choose DA58Tx if you want a larger, clearer screen so operators can see more of the part, sequence, axes, and messages at a glance—especially for complex jobs or multi‑shift use.

What Users Gain with Delem DA-58 on the Shop Floor

The main benefit of DA58T and DA58Tx is not in a single specification, but in how bending work becomes more repeatable and easier to share between operators. Programs turn into structured digital assets that can be recalled and updated instead of being held in one person’s memory.

In production, users typically see that:

  • Programs are easier to reuse across batches because part data, tools, and bend logic are stored consistently in the CNC.
  • Changeovers are more predictable: when a part returns, the operator refines an existing program instead of starting from scratch.
  • Angle corrections and adjustments can be handled through the controller, which reduces the tendency to “chase” errors from bend to bend.
  • The machine’s available capacity is used more effectively because axes, crowning, and tool selections are coordinated by the CNC.

Taken together, these changes move bending from a highly individual craft towards a controlled process—important when teams grow, shifts change, or customers demand consistent results over time.

DA-58T/DA-58Tx as Part of a Scalable CNC Control Strategy

DA58T and DA58Tx sit between numerical touch and full 3D controls in Delem’s range, which helps buyers choose a control level that matches current and future needs.

A typical progression looks like this:

  • DA53T / DA53Tx for mainly numeric programming on simpler parts and shorter sequences.
  • DA58T / DA58Tx for 2D graphical programming with automatic sequencing and collision checks on CNC press brakes.
  • DA66S and DA69S for applications that require 3D part and machine views, extended multi‑axis control, and more advanced integration options.

Understanding where DA58T and DA58Tx sit in this range helps decision‑makers align controller choice with current part complexity and with planned future investments in automation and digitalization.

Why Pair DA-58T/DA-58Tx with CNHAWE Press Brakes

DA58T and DA58Tx deliver their full benefit when the press brake is built around their axis control and graphical workflow. CNHAWE configures its servo‑electric press brakes and electro‑hydraulic CNC press brakes so that Y1/Y2 axes, backgauges, crowning, and safety systems work in step with Delem controllers.

This alignment helps you:

  • Get the most from 2D graphical control, because axis motion, crowning behavior, and hydraulic response are tuned to the CNC.
  • Train operators once on a consistent Delem interface and apply that knowledge across multiple press brake machines.
  • Start with DA58T or DA58Tx today and still keep a clear upgrade path toward DA66S or DA69S if your parts or automation level become more demanding.

If you are evaluating DA58T or DA58Tx for a new press brake or for a retrofit, CNHAWE can translate your actual parts and production targets into a practical machine and control specification. Share your drawings, materials and thickness range, batch sizes, and accuracy requirements, and the team can recommend the right press brake size, backgauge axes, crowning setup, and controller choice.

To determine the best combination for your application, contact CNHAWE to discuss CNHAWE press brakes equipped with Delem controllers.

Ready To Upgrade Your Metal Fabrication Line? ​

Email Us For A Free Consultation Or Download Our Full Product Catalog.​

Related Recommendations

Scroll to Top

Official Notice

Only trust www.cnhawe.com and cnhawe.cn. The website cn-hawe.com is fraudulent.

Contact Us Now

If you would like to have a question then get in touch today, we are ready to assist 24/7. We welcome your cooperation and we will develop with you.