Delem DA53T & DA53Tx Numerical Touch CNC Press Brake Controllers: A Practical Guide

Numerical touch CNC controls have become a practical choice for many press brake users who need more than basic NC but don’t require full 3D simulation. The Delem DA53T and DA53Tx fit this middle ground, offering touch‑based CNC with reliable multi‑axis control for synchronized press brakes.

Numerical Touch CNC on Press Brakes

From Manual Setup to Touch Control

Traditional press brakes depended on mechanical stops, angle charts, and experienced operators. Changing a part meant physically resetting stops and testing several pieces until the angle was right. That approach is slow, operator‑dependent, and difficult to standardize.

With numerical touch CNC, bending programs live inside the controller. The operator enters the part data on a touchscreen, and the control calculates the ram position, backgauge positions, and force for each bend. Once stored, programs can be recalled and reused with only minor adjustments, which stabilizes quality and shortens setup.

Why Numerical Touch Fits Everyday Fabrication

Compared with simple NC or manual machines, numerical touch CNC brings several advantages:

  • Reduced trial bends and faster first‑article approval
  • Easier training because operators work with labeled fields instead of codes
  • Consistent results on repeat orders thanks to stored programs and libraries
  • Lower complexity and cost than high‑end 2D/3D simulation controllers

For many small and medium shops, this is exactly the level they need: reliable CNC with a clear, touch‑driven interface.

Delem DA-53T numerical touch CNC press brake controller

How DA53T & DA53Tx Work in Daily Use

Programming a Part: Step‑By‑Step

Both DA53T and DA53Tx use the same basic logic when you create a program:

  1. Create or select a product in the product library.
  2. Choose punches and dies from the tool library.
  3. Select material type and thickness from the material library.
  4. Define each bend step (angle or depth, flange length, backgauge positions, speeds and dwell).
  5. Save the program with a recognizable name for future use.

The control then calculates:

  • Ram depth for the target angle, based on the selected tools and material
  • Backgauge axis positions (typically X plus a second auxiliary axis, such as R or Z)
  • Required bending force and crowning values for the machine, where crowning is installed​

The operator can run a test bend in single‑step mode. If the angle is slightly off, built‑in correction functions adjust the control’s calculation instead of forcing a complete re‑program. After confirmation, switching to automatic mode lets the machine execute the entire bend sequence.

Libraries and Corrections

Tool, material, and product libraries are central to how these controllers work:

  • The tool library holds punch and die data (angle, radius, height, etc.).
  • The material library stores properties for common steels, stainless steels, and aluminum.
  • The product library keeps full bend programs for recurring parts.

Once these are set up correctly, new parts that reuse known tools and materials can be programmed much faster. Angle calculation and force prediction become more reliable because they’re based on real tool and material data rather than guesswork.

Corrections fine‑tune results when material batches or tool wear cause small deviations. Operators measure the angle on a test piece, enter a small correction, and the control updates its angle calculation logic for subsequent bends or programs using the same setup.

Offline Programming and Data Handling

Both DA53T and DA53Tx support offline preparation and safe data management:

  • Programs and settings can be backed up and restored via USB.
  • Delem’s Profile‑T / Profile‑53TL software allows programming and editing on a PC.
  • Finished programs are moved to the machine only when they are ready, keeping the press brake in use rather than idle during programming.

For busy shops, this combination of numerical touch on the machine and offline programming in the office can significantly increase real cutting and bending time.

Core Capabilities Shared by DA53T & DA53Tx

Axes and Control Architecture

DA53T and DA53Tx are panel‑based CNC controls controlling up to 4 axes in typical standard configurations:

  • Y1 and Y2 axes for synchronized ram control
  • Two auxiliary axes (often X and R, or X and Z) for backgauge and related movements

Both controls support crowning functions when the press brake is equipped with a compatible crowning system. This allows them to work with the majority of common CNC press brake layouts in sheet metal fabrication, machinery frames, cabinets, and similar applications.

Their Y‑axis control algorithms work with proportional valves and encoders, allowing machine builders to implement closed-loop or suitable open‑loop hydraulic systems while keeping good positioning accuracy.

Interface and Operation Logic

From the operator’s perspective, DA53T and DA53Tx feel very similar:

  • Touchscreen interface with direct “hot‑key” access to main pages
  • Clear, form‑based programming screens for each bend step
  • Dedicated views for product selection, tool setup, diagnostics, and production status
  • Same Delem operating philosophy across the DA‑50Touch family

This consistency makes it easier to train operators and to move people between machines equipped with different Delem controls over time.

Libraries, Memory, and Connectivity

Both controllers offer:

  • Product, tool, and material libraries that are stored internally
  • 1 GB storage capacity, adequate for typical small and medium shop needs
  • USB interface for backup and data transfer
  • Compatibility with Profile‑T / Profile‑53TL offline software

The exact number of products or tools depends on the configuration, but for a typical user, the limitation is rarely memory; it’s how well the library is organized and maintained.

Difference Between DA53T and DA53Tx

Despite their shared foundation, DA53T and DA53Tx are not identical. The differences focus on visualization and how the control supports the operator.

Screen Size and Readability

  • DA53T uses a 10.1″ wide color TFT touchscreen.
  • DA53Tx is equipped with a 15.6″ high-resolution color TFT touchscreen.

Both use modern multi‑touch (PCT) technology and LED backlighting, but the larger screen on the DA53Tx makes it easier to see information from a distance or display more parameters on a single page. This is especially appreciated when operators stand further away or when several people are viewing the screen during setup.

Visual Support for Programming

Fundamentally, both controllers are numerical touch CNC systems: you program via numeric fields on a touchscreen. However, the DA53Tx can be configured with optional 2D graphical features to visualize tools or products, while the DA53T is typically configured as a purely numerical touch control.​

This does not turn the DA53Tx into a full 2D simulation controller like DA58Tx or DA66S, but it does provide extra visual help for programming and checking bend sequences where this 2D graphical programming option is enabled.

How to Choose in Practice

A simple, user‑focused way to position them in your content is:

  • Choose DA53T if you need a compact, cost‑effective numerical touch controller, your operators work close to the panel, and your parts are mostly standard shapes.
  • Choose DA53Tx if you want a larger screen for easier viewing, or if you plan to use simple 2D visualization to support more complex or varied bending work.

In both cases, the underlying bending logic, axis capability, and library‑based workflow remain consistent.

Where DA53T & DA53Tx Fit in a Press Brake Strategy

Typical Applications

Because they share the same 4‑axis foundation and Delem interface, DA53T and DA53Tx are well‑suited for:

  • General sheet metal fabrication (brackets, frames, channels, trays, panels)
  • Machine covers, enclosures, and cabinets for industrial equipment
  • HVAC components, electrical boxes, and light structural parts
  • Job shops handling a mix of small and medium batches

In these contexts, the main gains come from repeatable CNC bending, faster job changeovers, and less dependence on a single “expert” operator.

Training, Maintenance, and Growth

To get the most from either controller, it helps to think beyond the hardware:​

  • Training: Teach operators the full workflow—from product selection and programming to corrections and safe editing—so they can solve common problems without external support.
  • Library management: Invest time early in entering accurate tool and material data; keep it up to date as you add tooling or change suppliers.
  • Backups: Establish a simple USB backup routine for products and settings to avoid data loss and reduce downtime after service events.

When production requirements grow, the DA‑50Touch family and higher‑end Delem controls offer a logical upgrade path. Upgrading to DA58Tx or DA66S adds stronger 2D capabilities while maintaining a familiar Delem interface. This is exactly how CNHAWE structures its control options to enable upgrades without changing the operating philosophy.

Work with CNHAWE for the Right Controller and Machine Match

Numerical touch controllers like the Delem DA53T and DA53Tx give fabricators a solid combination of CNC accuracy, operator‑friendly programming, and manageable complexity. Choosing between them is mainly about screen size and visual support, not about learning a completely different system.

CNHAWE builds press brakes that integrate seamlessly with Delem controls, including DA53T and DA53Tx, and also offers upgrade paths to higher‑end Delem models when your parts or volume demand it. If you are planning a new machine, a retrofit, or a control upgrade, our engineers can help you match tonnage, backgauge configuration, and CNC controller to your actual parts and goals.

To explore how a CNHAWE press brake with Delem DA53T or DA53Tx can improve your bending efficiency and quality, contact CNHAWE and discuss your requirements with our technical team.

​

Ready To Upgrade Your Metal Fabrication Line? ​

Email Us For A Free Consultation Or Download Our Full Product Catalog.​

Related Recommendations

Scroll to Top

Official Notice

Only trust www.cnhawe.com and cnhawe.cn. The website cn-hawe.com is fraudulent.

Contact Us Now

If you would like to have a question then get in touch today, we are ready to assist 24/7. We welcome your cooperation and we will develop with you.